Buying diamond engagement ring is an important and emotional event for the bride to be. At the same time it should also remain enjoyable and memorable.

Diamonds are unique in that they can be categorized by characteristics associated with the diamond, namely colour, clarity, cut, carat & certification. The value and rarity of diamonds has produced unique ways for grading these characteristics.

The first thing you need to know about the diamonds in your Engagement ring are The Reporting: A detailed report should be available for each diamond. These enable a safe and secure purchase without actually viewing the diamonds involved.

The most trustworthy and accurate diamond grading report is the GIA (Gemological Institute of America).

The main characteristics in a diamond report include the diamond’s colour, clarity, cut and carat and should also include the measurements and angles.

The GIA is viewed as the supreme authority in diamond reporting; after-all they did invent the system used today.

Carat: This refers to a measurement of weight as opposed to size. Originally a ‘carab’ was a seed which was used as a weight measure - this adaptation is where carat derives its name. 1 carat is equal to 100 points.

Carat is the most price sensitive part of a diamond as it refers to the mass and a proportionate size. Once a diamond hits 1 carat, the price increases exponentially to the size.

Diamond Colour: Diamonds follow a colour spectrum that journeys from colourless through to light yellow. The rare diamonds have less yellow saturation and so are more valuable.

The GIA started the colour grading system in the 1950’s and as such are the masters of correct colour calibration.

The top colour is D and the spectrum follows down through the alphabet gaining more yellow as it proceeds. The top colours are D-E-F as they are colourless G-H-I-J are near colourless and represent excellent value. K-L-M start to show faint colour and are suited to yellow gold jewellery.

Diamond Clarity: Diamonds that are 100% pure crystalised carbon are known as IF or internally flawless. These diamonds are very rare as often very small contaminants are inside a diamond - known as inclusions.

Inclusions are ‘natures fingerprints’ and nothing to be worried about as long as you can’t see them.

Internally Flawless diamonds are essentially pure and clean of any inclusions; the next level down is VVS which means ‘Very Very Slight’ these inclusions are microscopic only visable through 50 x magnification.

The next range is VS which means ‘Very Slight’ that are detectable using a 10 x loupe but a good search is required and novices usually do not spot them. Then there is SI meaning ‘Slight Inclusion’ and these are still eye clean but are easily detected when enlarged 10 times under magnification; these diamonds are eye clean and a popular choice.

Diamond Cut

This refers to both the general shape of the diamond and also how well that shape has been made. We’ll refer to it as cut micro and cut macro:

Diamond cut macro is the general shape of the diamond. Diamond rough in octahedron form naturally gives itself to cutting round brilliant diamonds.

Other diamond rough shapes like ‘flats’ suit shapes like emerald cuts and tear-drops. The shape of

a diamond is usually guided by diamond rough retention as this increases the finished carat weight and will command a higher price.

Diamond Shapes

The shape of a diamond is usually guided by diamond rough retention as this increases the finished carat weight and will command a higher price.

Diamonds are very unique and one can spend a lifetime understanding how the ‘hardest of earth’s natural minerals’ can be cut and shaped to reflect light.

The colours and qualities that diamonds present can sometimes be difficult to match for a particular budget but its important to note that this will stay on your engagement hand for life and is a symbol of your love together.

There are a few steps that are going to be involved in buying an engagement ring. If you want to get a white gold engagement ring setting, you will need to choose which setting is going to be best. Whether you end up opting for a unique engagement ring setting or any other, here is some information that will help ensure you make the right choice.

Setting Choices

There are a few white gold engagement ring setting choices that you will want to be aware of. The prong is one of the first that you will want to consider, as it is one of the most popular and for good reason.

The prong will be a great choice as your white gold engagement ring setting, for one because the hooks used here are slender and discreet, and so they are hardly noticeable, and so that the diamond used in the ring will receive an equal amount of light from all directions.

Another great choice for a white gold engagement ring setting is the bezel setting. This setting has a metal rim which surrounds the diamond and makes sure that it is kept securely in place. The rim extends slightly above the diamond, which is a very functional feature because it ensures that all the edges are well protected and the diamond will not fall out or get chipped.

Or perhaps you would prefer the pave ring setting, and if you love diamonds then you will really love this setting, because it makes the diamond stand out more than any other setting choice. It is basically a cluster of small diamonds encrusted along the surface of the band, and tiny beads or small prongs are used to secure the diamonds in place.

It is important that you take the look that you are going for to choose the right ring setting. So of course you are going to want it to be just perfect and make sure that she sees it and says yes, after all, this is the ring that you are going to be using to ask that special lady in your life to marry you.

Remember how important it is for you to choose the right white gold engagement ring setting, because an attractive engagement ring setting will really make all the difference and can make even the most inexpensive diamond ring look like it is worth a million bucks.

Summary: When you buy jewelry, remember the four Cs of diamond buying and when buying antique jewelry, remember these two other Cs, to ensure you’re buying a true antique, not just a bit of pre-owned jewelry.

When buying antique or estate jewelry, there’s more to keep in mind than just the four Cs (cut, color, clarity and carat weight ). You’ve got to know whether you’re purchasing an actual antique or simply an estate piece. So consider two more Cs: cost and credibility.

Cut: Cut is one of the most important considerations when buying a diamond. The way in which a gemstone is cut affects its appearance and its durability - as well as its value. Diamonds are generally cut into shapes that best accentuate clarity and brilliance. Most common shapes for diamonds are brilliant (round), baguette, marquise, oval, pear and princess (square) cuts.

Color: Diamonds range in color grades starting from D and moving straight through the alphabet to Z. While many diamonds may appear to be white (colorless), they may in fact contain traces of other elements (aside from carbon), which impart slight yellow or brown tinges. D-color diamonds are extremely rare and highly valuable. Stones as far along the scale as G are still largely clear; but the further you get from D, the deeper the coloration.

Some diamonds occur naturally in shades of blue, yellow, green, pink or even red. These “fancy” diamonds are extremely rare and costly.

Clarity: Clarity refers to the size and amount of inclusions in a diamond. Most are merely traces of carbon that didn’t crystallize during formation, undetectable by the naked eye. The average consumer would need a microscope (and a considerable period of scrutiny) to see them.

The more inclusions in a diamond, the greater the interference with light dispersion; this diminishes the brilliance of the gem. Large or numerous inclusions will also decrease a stone’s value. The converse is also true: The fewer or smaller the inclusions, the more valuable the diamond.

Diamonds are rated by clarity under 10x magnification. Diamonds rated IF contain only external flaws, which may be removed by additional polishing. Inclusions in VVS1- and VVS2-rated diamonds are “very, very slight.” VS1- and VS2-rated diamonds have “very slight” inclusions. The inclusions in SI1- and SI2-rated stones are “slight”; and the I1- I2- and I3-rated stones have imperfections large enough to be visible to the unaided eye.

Carat Weight: Diamonds are measured in carats; this measurement doesn’t refer to their size, shape or diameter - just their weight. Because one carat may be divided into units of 100 points, a 3/4-carat diamond is described as being 75 points or 0.75 carat. The larger the diamond, the more expensive its per-carat cost; expect to pay more for a one-carat diamond than for two half-carat diamonds of similar cut and clarity.

Cost & Credibility: The higher the quality of your chosen diamond, the more it is worth. But don’t assume you’re getting a valuable diamond because you’re paying a lot. That’s where credibility factors in. By credibility, we mean, “Are you buying this diamond from a reputable dealer?” and “Are you actually getting what the dealer says you’re getting?” Is this ring being represented as an “antique” when it’s actually “estate” jewelry (a fancy term for pre-owned)? The best way to know for sure is to know your jeweler. To ensure you get the best jewelry for your buying dollar, from a reputable dealer with years of experience, visit Estate Diamond Jewelry. All they do is estate and antique jewelry.

The diamond is unique in the hierarchy of gems. Its elegance has been loved since its discovery.

Whether you have experienced buying diamonds for engagement rings before or not, you may be unsure as to why one is worth $3000 while another one is only worth $300. What goes into determining the price of a diamond?

The physical weight of a diamond is referred to as its “carat”. The value of a diamond is directly proportional to its size. The larger the diamond, the more valuable it is, because larger diamonds are less common. Greater size makes the diamond more spectacular, and therefore increases the purchase price.

Price is not solely determined based on the number of carats however. Expensive diamonds also need to have excellent clarity. The means the inside of the diamond should be free from “inclusions”, and the outside of the diamond should be blemish free.

The number of inclusions as well as their size and tint all factor into the overall clarity score, as do the number and size of surface blemishes. A flawless diamond is at the top end of the clarity scale, referred to as ‘pure’. An inexpensive diamond may carry with it the classification of ‘heavily included’.

The appearance or absence of these imperfections is a result of how the diamond was formed underground over thousands of years. Since diamonds are often thought of as the symbol of perfection in our society, the more perfect they actually are under the scrutiny of a microscope, the more expensive they become.

Color is the next factor that determines a diamond’s overall value. If possible, a diamond should be as clear as water, but this is not always the case. Colors from other gases and minerals around during the time of the diamond’s formation may have altered its clean appearance and left the gem tinted.

The color of a diamond ranges from “D,” which is a complete lack of color, to “Z,” which is depicts a very noticable coloration. Diamonds are priced highly if they are deeply colored or are exceptionally clear. Hazy, off-colored diamonds are not considered a favorable item, so they are priced lower.

Cut is the final factor in diamond grading. This is an often forgotten element of diamonds, but it is extremely important, as it gives this remarkable stone its ability to come alive.

A diamond that sparkles and glitters can be said to have ‘fire’. The actual rating system uses common words like good, average, and irregular. The bottom line though is if you want your diamond to sparkle even in dim light, then you need to make sure the cut is impeccable, and that will cost you more money.

Diamonds are rare, but they are not equally special. Understanding the four important C’s of carat, clarity, color and cut that represent the value of a diamond will usher you towards making a better buying decision.

When you’re designing your fiancé’s engagement ring, it is important to remember that she has to wear it for the rest of her life, not you, so make sure you make your choices based on her tastes, not your own. Take your time and be sure to find the right style for your soon-to-be bride. Does she prefer classic or traditional? Does she dress in conservative colors, print and cuts, or does she project a more flamboyant image? Look at her jewelry and start taking small mental notes regarding their attributes and apply those to your ideas about designing her engagement ring. Ask her friends and family what they think she will like. If it comes time to design the ring and you still haven’t figured it out, go with something simple and elegant, like a solitaire.

When your design your own engagement ring, consider the type of metal to be used for the ring. Most engagement rings are made in either gold or platinum, although alternative metals such as white gold, rose gold and titanium are becoming increasing popular. Be aware that if you choose titanium to design an engagement ring you will not be able to form very intricate patterns. Platinum is more malleable but also less durable and significantly more expensive than titanium.

Next, select the right precious stone or stones for your engagement ring. Make sure that you choose something that compliments the setting. Go with a diamond unless you are sure that your fiancé would appreciate something more unique, or choose another stone, such as an emerald, sapphire or pearls, to go on either side of the diamond. There are many cuts to choose from, some of the most popular being round, princess, emerald, marquise, pear oval, radiant, heart and Asscher. Then figure out what kind of size and quality you can afford, and buy the best diamond in your price range. You may once again have to think about what your future bride will prefer – quality or quantity?

There are a number of places you can design a personalized engagement ring for your bride. One of the most popular places to design rings on the web is the Blue Nile. You can choose from nine different cuts of diamonds, all of which are GIA certified, making it easy to compare the quality of different diamonds within your price range. After you chose a cut and a size for the ring, you can choose the setting. Blue Nile offers Platinum and 18K Gold settings in Solitaire, Three Stone, or Settings with Side stones configurations.

Having made up your mind that you are giving your heart and soul to another, you are now prepare to make a statement with which to express your dedication and love for the other and so you wish to do all this by giving an engagement ring to construct things between you more more lasting. Even though you have an idea the type of engagement ring has look like, coming up an engagement ring that matches your anticipations and your budget may prove to be somewhatmore elusive.

When Design Your Engagement Ring FigureThe Setting and Type of Stone in Your Mind

Nonetheless, if you are of creative bent of mind, you can then consider designing your own engagement ring and also buck up from the fact that this is not so much a hard task as you may imagine. Nonetheless, prior to you design your engagement ring , you should visualize the engagement ring as being an ensemble of the stone and a desirable setting, and once you can picture these two aspects, you had better then put pencil to paper and sketch or even make notes about the specific details of the engagement ring.

As you choose to design your engagement ring you must must make certainabout the right type of material to be utilized for the engagement ring and only then can you get down to the particulars. Therefore, you should make up your mind as to the type of stones to be used, their number as well as size and of course, diamonds will for certain (found|prove} to be a popular choice though you should leave your mind open to other stones as well including opals, sapphires and rubies. Having said that design diamond engagement own ring has become a lot popular}.

Although|While} designing your own engagement ring you could also require to decide on the characteristics of your engagement ring including whether to use white or yellow gold and even decide on whether platinum would not be more useful. Next, youmust undoubtedly about the type of setting for your engagement ring and here you can pick out from bezel or pave or even channel and naturally, prong setting. Ultimately, The best alternative is one that does the most to enhance the wearer’s personality. So you should selectan appropriate size as well as shape of the setting.

Of course, you have to check first and then counter check the designs that the jeweler come up with based on your specifications and only after you are satisfied that the completed designs meet your expectations; you can then give the go ahead to turn your designs into action. Lastly, to conclude the design your engagement ring, you need to know the better outlets from where you can bargain the materials as well where to get the engagement ring made to your exact specification.

When you are so deeply in love with someone, what are you going to do? The beginning of a bigger step in relationship is that when you have decided you would like to spend the rest of your life with this special person, you are now ready to make a statement with which to express your commitment and love for the other and so you don’t want to lose her and in turn would like to present an engagement ring to make things between you more permanent. You are so confident that you will have an idea about how the engagement ring must look like and what type, though finding an engagement ring that matches with your expectations and your budget may prove to be somewhat elusive.

Picture Setting and Type of Stone in Your Mind when Design Your Engagement Ring

Nevertheless, if you are of creative bent of mind, you can then consider designing your own engagement ring and also take heart from the fact that this is not such a difficult task as you may imagine. However, before you design your engagement ring , you should picture the engagement ring as being an ensemble of the stone and a suitable setting, and once you can picture these two aspects, you should then put pencil to paper and sketch or even make notes about the specific details of the engagement ring.

When you decide to design your engagement ring you must also be sure about the right type of material to be used for the engagement ring and only then can you get down to the specifics. Thus, you should make up your mind as to the type of stones to be used, their quantity as well as size and of course, diamonds will certainly prove to be a popular choice though you should leave your mind open to other stones as well including opals, sapphires and rubies. Having said that design diamond engagement own ring has become more popular.

Succeedingly, must without doubt about the type of setting for your engagement ring and here you are able to choose from bezel or pave or even channel and naturally, prong setting. While designing your own engagement ring you might also require to choose on the characteristics of your engagement ring including whether to utilize white or yellow gold and even choose on whether platinum would not be more useful. Ultimately, you should selectan appropriate size as well as shape of the setting and the best option is one that does the most to enhance the wearer’s personality.

Finally, to complete the design your engagement ring, you need to know the better outlets from where you can purchase the materials as well where to get the engagement ring made to your precise specification. Naturally, you have to check first and then double-check the designs that the jeweler come up with based on your specifications and only after you are gratified that the completed designs meet your expectations; you can then give the go ahead to turn your designs into action.

Engagements are very special, it’s a sign of commitment, at least for a start. Your love is so deep that you’d want to spend the rest of your life together or in some cases, at least try to.

The Vein of Love

The tradition of wearing engagement rings was believed to come from the Romans. The third finger which is said to have a vein that leads to the heart hence it is called vena amoris (vein of love), that is why the ring is often worn on the left hand.

Choose The Right Store To Find The Right Ring

Everyone has their own traditions and beliefs when it comes to the symbolism of the engagement ring. The problem is that they are so engrossed in the air of “amore” that they forget that engagement rings are also investments which should be given considerable thought before purchasing.

Most of the time a guy, or a couple will just go into any popular engagement ring stores without knowing that choosing the right ring does not only entail the prettiest design. There are a lot of things to consider before going into an engagement ring stores and you as the guy should be prepared.

The Importance of Budget

Knowing you have a set of budget before going into any engagement ring stores will be the wisest decision, this goes both to either you are shopping alone or with you fiance. Sales people are sometimes can be sleazy. They will make you believe that the cost of the ring shows your fiancee the amount of your love. Don’t be fooled easily because you know how much you can afford.

Do Your Homework!

Now you may think this is easy, but it’s not that simple at all. You must pay attention and do your homework before hand. When you go into any engagement ring stores, you will be overwhelmed with a lot of precious metals as your ring’s setting. You can either choose gold, titanium, rose gold, platinum, and white gold or a combination of precious metals. Then there’s the design which do you think suits your beloved’s taste? Traditional, understated, modern, or intricate?

What Will The Deal Breaker Be

Who doesn’t knows that the deal breaker is always the stone. The most evergreen choice will always be the Diamond; after all it is a girl’s best friend. When you are going into an engagement ring stores, be armed with the knowledge that when picking up a diamond you have to know the “Four C’s” Carat weight, Clarity, Cut, and Color. This is because fake diamonds are existing in the market so you have to be careful.

Another tip that you should know is that engagement ring stores will always offer you diamonds that have already been preset. Therefore if possible it is better to choose a setting and a diamond separately, because sometimes if not always you can examine closely a diamond better when it has not been set yet.

Tag along a friend and make sure the two of you have read up on the fine points of choosing the right diamond if surprising your girlfriend is your agenda. Select a good and reputable engagement ring stores, they can be a little pricey but you may be assured of the quality. Lastly don’t forget asking for a certification on the authenticity of the ring.

With the passage of time, a lot of innovation has been seen in Engagement rings
options that are available to the people looking to get most precious ring for making their everlasting moments most memorable. Design is the biggest challenge when it comes to
Engagement ring, unique, exciting and individual design is the aim of everyone looking for engagement ring. Engagement ring may be made from highly expensive and precious metals, like Gold, silver, or stones like diamond or  CZ, they are all equally attractive for the customers but nothing can match diamonds’ leadership in engagement rings.

Beyond social and c cultural differences, Engagement ring is the similar way of fixing a marriage and it serve as strong recall and memorandum of understanding between the two parties that they have committed to each other and they are bound to abide by the same. The moment anyone see your Engagement ring, he is compelled to believe that you are in a long-term venture with your love done to com-up with an exciting and extraordinary relationship. Engagement rings are sold at Gold shops, gift Shops and other superstore where Gold Souks are part of the whole retails experience and you may choose different materials and designs suiting to your desires and pocket.

Gold is the passion, preference and fashion for women. This delicate world of gold has been secured by an efficient and reliable infrastructure of electronically controlled security system. It’s an exciting new experience in jewelry shopping where convenience and security have the rule and you may go-on to find you engagement ring of your choice without any fear and hassle. It’s not always important that you go for high-coast metal in engagement ring; it’s the design and presentation that can satisfy the elegance and class which this occasion asks for, so do a lot of homework and research before purchasing an engagement in for your lifetime venture.